T.Fit
T.Fit Orthodontic mini screw Single
In stock (216 units)Regular price LE 555.00 EGPUnit price /Unavailable
Up to 10% offMatt
Matt Ortho Implant Mini Screw INFRAZYGOMATIC LONG NECK Mushroom Button Head titanium grade 5
In stock (400 units)Sale price LE 870.00 EGP Regular price LE 970.00Unit price /Unavailable
Up to 10% offMatt
Matt Ortho Implant Mini Screw bracket head titanium grade 5
In stock (600 units)Sale price LE 770.00 EGP Regular price LE 860.00Unit price /Unavailable
Up to 10% offMatt
Matt Ortho Implant Mini Screw Mushroom Button Head titanium grade 5
In stock (1020 units)Sale price LE 770.00 EGP Regular price LE 860.00Unit price /Unavailable
Up to 10% offMatt
Matt Ortho implant mushroom miniscrew low speed SHAFT
Low stock (15 units)Sale price LE 2,230.00 EGP Regular price LE 2,475.00Unit price /Unavailable
Dentaurum
In stock (30 units)Regular price LE 1,845.00 EGPUnit price /Unavailable
Dentaurum
In stock (30 units)Regular price LE 1,825.00 EGPUnit price /Unavailable
T.Fit
T.Fit Ortho dontic mini screw single
In stock (70 units)Regular price LE 825.00 EGPUnit price /Unavailable
How to Choose the Right Orthodontic Mini Screw for Your Practice
- TAD vs Standard Dental Implant — A temporary anchorage device is a smaller-diameter, shorter fixture placed for the duration of active tooth movement and removed afterward, unlike a standard dental implant, which is placed for permanent osseointegrated prosthetic support.
- Diameter and Length Selection — Screw diameter and length must match the available bone volume and adjacent root proximity at the chosen site; a longer infrazygomatic screw suits denser cortical anchorage in the buccal shelf region, while shorter interradicular screws suit standard alveolar sites.
- Insertion Torque and Primary Stability — Adequate primary stability generally requires an insertion torque in a moderate range specific to the screw system; torque that is too low risks early mobility, while excessive torque risks screw fracture during placement.
- Head Design — A bracket head accepts direct wire engagement, a button head suits elastic or ligature attachment, and an infrazygomatic long-neck design provides extended reach from the buccal shelf to the archwire level for maxillary molar distalization or intrusion.
- Titanium Grade — Grade 5 titanium alloy (Ti-6Al-4V) offers higher mechanical strength than commercially pure titanium, reducing fracture risk during insertion into denser cortical bone sites.
- Self-Drilling vs Pre-Drilled Placement — Self-drilling mini screws are placed directly without a pilot hole in most sites, reducing chair time, while pre-drilling is still recommended in denser cortical bone to reduce the risk of screw fracture on insertion.
Mini Screw Head Designs at a Glance
| Head Design | Attachment Type | Typical Placement Site | Best Suited For |
|---|---|---|---|
| Bracket Head | Direct wire engagement | Interradicular alveolar bone | Direct archwire-level anchorage mechanics |
| Mushroom Button Head | Elastic/ligature tie | Interradicular alveolar bone | Elastic-chain anchorage for space closure |
| Infrazygomatic Long Neck | Elastic/ligature tie | Buccal shelf/infrazygomatic crest | Maxillary molar distalization or intrusion |
Availability & Delivery in Egypt
MedSTA supplies T.Fit and Matt Ortho titanium grade 5 mini screws priced in EGP with delivery to practices across Cairo, Giza, Alexandria, and all Egyptian governorates. Store mini screws in their sterile packaging until immediately before placement, and confirm autoclave compatibility of the driver components used for insertion.
Frequently Asked Questions
What is a TAD (temporary anchorage device) and how does it differ from a standard dental implant?
What is a TAD (temporary anchorage device) and how does it differ from a standard dental implant?
A TAD is a smaller-diameter, shorter titanium screw placed only for the duration of active tooth movement and removed once anchorage is no longer needed, unlike a standard dental implant, which is intended for permanent osseointegrated prosthetic support.
How do I select mini screw diameter and length for a given site?
How do I select mini screw diameter and length for a given site?
Diameter and length should be matched to the available bone volume and adjacent root proximity at the planned site; interradicular alveolar sites typically use shorter screws, while infrazygomatic buccal shelf placement uses longer screws for denser cortical anchorage.
What insertion torque range achieves adequate primary stability?
What insertion torque range achieves adequate primary stability?
Primary stability generally requires insertion torque within a moderate range specific to the screw system in use; torque that is too low risks early screw mobility, while excessive torque increases the risk of screw fracture during placement.
Bracket head vs button head vs infrazygomatic long neck — when should each be used?
Bracket head vs button head vs infrazygomatic long neck — when should each be used?
A bracket head suits direct archwire engagement, a mushroom button head suits elastic or ligature-tie attachment, and an infrazygomatic long-neck design extends reach from the buccal shelf to archwire level for maxillary molar distalization or intrusion.
Does MedSTA supply titanium grade 5 mini screws across Egypt?
Does MedSTA supply titanium grade 5 mini screws across Egypt?
Yes. MedSTA delivers T.Fit and Matt Ortho titanium grade 5 mini screws to orthodontic practices across Cairo, Giza, Alexandria, and all Egyptian governorates, priced in EGP with nationwide delivery.