Asnanco
Very low stock (4 units)Regular price LE 295.00 EGPUnit price /Unavailable
Asnanco
Chu's Aesthetic Guage (stainless steel)
Very low stock (7 units)Regular price LE 1,145.00 EGPUnit price /UnavailableAsnanco
Very low stock (5 units)Regular price LE 575.00 EGPUnit price /Unavailable-
Asnanco
IPR GUAGE Interproximal Reduction Gauge
Low stock (9 units)Regular price LE 165.00 EGPUnit price /Unavailable
Asnanco
Asnanco dental precision measuring ruler
Very low stock (8 units)Regular price LE 120.00 EGPUnit price /Unavailable
Asnanco
Lateral Approach sinus lifting drill
Low stock (10 units)Regular price LE 370.00 EGPUnit price /Unavailable
How to Choose Implant Instruments and Kits for Your Practice
- Sinus Lift Kit (Internal vs External Technique) — Internal (transcrestal) sinus lift kits (e.g. Premia Internal Sinus Lift Kit) contain osteotome sets in graduated diameters (2.0–5.0 mm) for hydraulic or malleted membrane elevation through the osteotomy site, appropriate for sinus floor elevations of 3–5 mm with ≥4 mm residual bone height. External (lateral window) kits include piezoelectric tips, osteotomes, and elevators for membrane reflection through a lateral antrostomy window, required for elevations >5 mm or <4 mm residual bone.
- Osseoconduction Bur Kits (Densification vs Conventional Drilling) — Osseo-densification burs (e.g. Premia Osseo Densification Kit, 17 pcs) use reverse-cutting Densah bur design that compacts rather than removes bone during osteotomy preparation, improving primary implant stability in D3–D4 bone by preserving and laterally compacting bone trabecular density. Conventional sequential drilling removes bone; densification compacts it — the clinically relevant difference in Egyptian patients with frequent D3 maxillary posterior bone.
- Osteotome Diameter Range — A complete sinus lift osteotome set includes sizes 2.0, 2.5, 3.0, 3.5, 4.0, and 5.0 mm to accommodate the full range of osteotomy diameters used in sequential internal sinus elevation from initial pilot drill to final implant socket diameter. Graduated sizing prevents membrane perforation by rapid single-step diameter changes.
- Mallet vs Hydraulic Elevation — Malleted osteotome technique applies direct axial force through a surgical mallet; hydraulic technique (e.g. Antrum Lift Balloon, MEISINGER) uses saline pressure. In Egyptian patients with thin or fragile sinus membranes (common in older patients and those with chronic sinusitis), hydraulic elevation has a lower membrane perforation rate than malleted technique.
- Sinus Lift Kit Compatibility with Implant System — Confirm the osteotome set is compatible with the final implant diameter selected for the case; the osteotomy created by the largest osteotome should match the implant body diameter (±0.2 mm) for optimal cortical compression and primary stability at implant insertion.
Implant Instrument Kits Available in Egypt
| Product | Type | Instruments | Price (EGP) |
|---|---|---|---|
| Premia Internal Sinus Lift Kit | Transcrestal sinus | Osteotome set | 3,500 |
| Sedra Sinus Lift Kit (5 pcs) | Sinus osteotomes | 5-piece set | 5,500 |
| Premia Osseo Densification Kit (17 pcs) | Bone densification | 17-bur set | 8,000 |
Availability & Delivery in Egypt
MedSTA supplies implant surgical instrument kits from Premia, Sedra dent, and generic brands in EGP with same-day dispatch from Cairo. Cairo and Giza delivery within 1–3 business days; all other Egyptian governorates within 3–5 business days.
Frequently Asked Questions
What is the difference between an internal and an external sinus lift?
What is the difference between an internal and an external sinus lift?
An internal (transcrestal) sinus lift is performed through the implant osteotomy using graduated osteotomes or hydraulic pressure to elevate the Schneiderian membrane from below, appropriate for sinus floor elevations of 3–5 mm when ≥4 mm residual alveolar bone height provides adequate primary stability. An external (lateral window) sinus lift uses a lateral antrostomy window in the posterior maxillary sinus wall to access the sinus floor directly for membrane reflection and bone graft placement, required for elevations >5 mm or when <4 mm residual bone prevents simultaneous implant placement. Egyptian maxillary posterior implant cases frequently require sinus elevation due to the high prevalence of severely resorbed posterior maxillae.
What is osseo-densification and when is it preferred over conventional implant drilling?
What is osseo-densification and when is it preferred over conventional implant drilling?
Osseo-densification uses specially designed Densah burs that rotate in reverse (counter-clockwise) during osteotomy preparation, compacting and expanding bone laterally rather than removing it. The resulting denser osteotomy walls improve insertion torque by 20–40% compared to conventional drilling in D3–D4 bone, significantly increasing primary stability in Egyptian patients with soft maxillary posterior bone — the most common implant placement location in the Egyptian patient population. Osseo-densification is particularly indicated when insertion torque with conventional drilling would be <25 Ncm in posterior maxillary sites.
Can sinus lift kits from different manufacturers be used with any implant system?
Can sinus lift kits from different manufacturers be used with any implant system?
Osteotome sets (sinus lift instruments) are compatible with any implant system because they prepare the bone site independent of the implant connection type; the implant is placed after osteotomy preparation is complete. However, osteotome diameters must match the implant diameter selected for the case. Osseo-densification Densah burs are used in any forward/reverse-capable implant surgical motor and are not implant-system-specific. Confirm the surgical motor can operate in reverse rotation before purchasing Densah bur sets.
How should implant surgical instruments be sterilised between cases?
How should implant surgical instruments be sterilised between cases?
Autoclave all implant surgical instruments using Class B cycles (134°C, 3 bar) in the pouched or wrapped configuration. Before autoclaving, clean in an ultrasonic bath with enzymatic detergent to remove bone debris from osteotome tips and bur flutes, then rinse and dry. Inspect osteotome tips and bur cutting edges before every autoclave cycle; even minor tip deformation or cutting edge blunting compromises osteotomy precision in implant surgery where dimensional accuracy directly affects primary stability. Replace blunt or damaged instruments before the next case.
Does MedSTA supply sinus lift kits and osseo-densification burs across Egypt?
Does MedSTA supply sinus lift kits and osseo-densification burs across Egypt?
Yes — MedSTA supplies the Premia Internal Sinus Lift Kit (3,500 EGP), Sedra Sinus Lift Kit 5-piece (5,500 EGP), and Premia Osseo Densification 17-bur Kit (8,000 EGP) in EGP with same-day dispatch from Cairo. Cairo and Giza delivery within 1–3 business days; all other Egyptian governorates within 3–5 business days.