5% offgodent
Low stock (15 units)Sale price LE 19,000.00 EGP Regular price LE 20,000.00Unit price /Unavailable
How to Choose the Right Implant Detector for Your Practice
- Detection Method — Most chairside implant detectors use electromagnetic induction to sense the metallic implant body or cover screw through mucosa, giving audible or visual proximity feedback that intensifies as the probe nears the fixture. This principle works independent of implant brand or platform design, unlike systems that rely on a matched RFID tag.
- Detection Depth — Practical detection range through soft tissue is typically 2–15mm, covering healed cover-screw depths after two-stage implant placement. Confirm the stated depth range against typical soft-tissue thickness at the surgical site before relying on the device instead of a periapical radiograph.
- Probe Tip Sterilizability — The tissue-contacting probe tip should be autoclavable to 134°C to meet standard dental sterilization cycles between patients; devices with a sealed, non-autoclavable housing require a disposable barrier sleeve for every use instead.
- Signal Feedback Type — Audio-pitch feedback allows the operator to keep eyes on the surgical field while locating the fixture, while a visual LED or needle-gauge display gives a second confirmation signal — devices offering both reduce false-negative readings from ambient handpiece noise in a busy operatory.
- Power Source — Rechargeable units avoid mid-procedure battery failure during second-stage uncovering, while disposable-battery units are lower cost but should be checked before each surgical session; confirm charging cable/connector availability locally in Egypt before purchase.
- Clinical Indication — Implant detectors are primarily used for flapless second-stage uncovering with a tissue punch, verifying implant position before final impression when the cover screw is not visually identifiable, and locating a submerged or fractured fixture during retrieval planning.
Implant Detector Types at a Glance
| Type | Detection Method | Power | Best Use |
|---|---|---|---|
| Handheld pointer probe | Electromagnetic induction | Rechargeable | Second-stage flapless uncovering |
| Pen-style locator | Electromagnetic induction | Battery | Chairside position confirmation |
Availability & Delivery in Egypt
MedSTA supplies implant detectors from Godent and Dempex, priced in EGP with delivery across Cairo, Giza, Alexandria, and all Egyptian governorates. Both models ship with the probe tip, charging accessories where applicable, and a manufacturer's instructions-for-use insert.
Frequently Asked Questions
What is an implant detector used for in dental implantology?
What is an implant detector used for in dental implantology?
An implant detector is a handheld electronic device that locates the exact position and depth of a submerged implant fixture or cover screw beneath healed mucosa using electromagnetic induction. It is most often used before flapless second-stage uncovering surgery, allowing the clinician to mark the tissue-punch site precisely without raising a flap or relying solely on a periapical radiograph.
Does an implant detector work with any implant system or brand?
Does an implant detector work with any implant system or brand?
Yes. Because these devices detect the metallic mass of the implant body itself rather than reading a brand-specific tag or chip, an implant detector works across implant systems and manufacturers. Detection accuracy depends more on soft-tissue thickness and probe proximity than on the specific implant brand placed.
How accurate is an implant detector compared to taking a new X-ray?
How accurate is an implant detector compared to taking a new X-ray?
A properly calibrated implant detector reliably identifies fixture position and approximate depth to within a few millimetres for chairside second-stage planning, which is sufficient for marking a tissue-punch site. It does not replace radiographic imaging for assessing bone level, angulation, or osseointegration status — those still require a periapical or CBCT scan when clinically indicated.
Can the implant detector probe be sterilized between patients in an Egyptian clinic?
Can the implant detector probe be sterilized between patients in an Egyptian clinic?
Most detector probe tips are manufactured from autoclavable stainless steel and can be processed through a standard 134°C autoclave cycle between patients, consistent with routine Egyptian clinic sterilization protocols. Confirm the specific model's autoclave rating in its instructions-for-use before first use, and inspect the probe housing seal for any signs of moisture ingress after repeated cycles.
Does MedSTA supply implant detectors with delivery across Egypt?
Does MedSTA supply implant detectors with delivery across Egypt?
Yes, MedSTA supplies implant detector units including the Godent ID1 and Dempex models with EGP pricing and delivery to clinics and hospitals across Cairo, Giza, Alexandria, and all Egyptian governorates.