GENERIC
Very low stock (2 units)Regular price LE 20.00 EGPUnit price /Unavailable-
GENERIC
Low stock (10 units)Regular price LE 75.00 EGPUnit price /Unavailable
GENERIC
Low stock (10 units)Regular price LE 75.00 EGPUnit price /Unavailable
How to Choose Dental Face Safety Equipment for Your Practice
- Face Mask Classification (Type I, II, IIR per EN 14683) — Type I: filtration ≥95% bacteria, no splash resistance, for patient use only. Type II: filtration ≥98% bacteria, no splash resistance. Type IIR: filtration ≥98% bacteria, splash-resistant (fluid resistance ≥120 mmHg) — the minimum standard for dental clinical use during aerosol-generating procedures. Egyptian dental infection control protocols require Type IIR or equivalent for all clinical sessions.
- Face Shield vs Safety Glasses for Eye Protection — Face shields (full-face polycarbonate) provide superior peripheral eye and facial coverage for aerosol-generating procedures (scaling, high-speed handpiece, air polisher); safety glasses with lateral shields provide adequate coverage for lower-aerosol procedures (examination, restorative). Both must be disinfected between patients; face shields are more easily disinfected with a spray-wipe per patient.
- Mask Fit and Seal — A properly fitted face mask seals against the nasal bridge and under the chin without gaps. In Egyptian clinics where mask-over-loupes setups are common, confirm the mask nose strip can be moulded to sit flat under the loupe frame without creating a gap at the nasal bridge.
- Anti-Fog Treatment on Safety Glasses — Fogging is the primary complaint with dental safety glasses in Egyptian clinic settings where the mask’s exhaled air rises into the glass lens area. Anti-fog-coated lenses or a mask with a tight nose seal significantly reduces fogging during clinical procedures.
- EN 166 Certification for Safety Glasses — Dental eye protection must meet EN 166 (European standard for eye protectors) confirming optical clarity, UV protection, and impact resistance. Check for the EN 166 marking on the lens or frame before purchasing as non-certified eyewear provides inadequate protection against dental splatter velocities.
Availability & Delivery in Egypt
MedSTA supplies dental face masks, face shields, and safety glasses in EGP with same-day dispatch from Cairo. Cairo and Giza delivery within 1–3 business days; all other Egyptian governorates within 3–5 business days.
Frequently Asked Questions
What face mask type is required for aerosol-generating dental procedures in Egypt?
What face mask type is required for aerosol-generating dental procedures in Egypt?
Type IIR face masks (EN 14683) with ≥98% bacterial filtration efficiency and splash resistance (≥120 mmHg fluid resistance) are the minimum standard for dental clinical use during aerosol-generating procedures including ultrasonic scaling, high-speed handpiece cavity preparation, and air polishing. Type I and Type II masks without the R designation lack splash resistance and are not appropriate for procedures involving blood and saliva splatter. Egyptian Ministry of Health infection control guidelines for dental settings align with WHO IPC recommendations for Type IIR masks.
Must dental clinicians wear both a face mask and a face shield during scaling?
Must dental clinicians wear both a face mask and a face shield during scaling?
Yes — face masks protect the respiratory tract and mouth from aerosol inhalation but do not provide eye protection; face shields or safety glasses protect the eyes and face from splatter. During ultrasonic scaling (the highest aerosol-generating dental procedure), both a Type IIR mask and a full-face shield are recommended by ADA, WHO, and Egyptian dental infection control protocols. Safety glasses alone are insufficient during scaling because they leave the inferior periocular area and nose exposed to aerosol plumes generated at chairside water spray velocities.
How often should dental face masks be changed during a clinical session?
How often should dental face masks be changed during a clinical session?
Replace the face mask after each patient or every 3 hours of continuous wear, whichever comes first. Masks become saturated with exhaled moisture and oral aerosol after approximately 30–60 minutes of continuous wear in a dental clinical environment, reducing filtration efficiency to below the stated EN 14683 specification. In Egyptian summer with high ambient temperature and humidity, mask saturation occurs faster — monitor for visible moisture on the mask exterior and replace immediately if detected. Never touch the mask front surface during patient care; adjust at the ties or ear loops only.
Can dental face shields be reused between patients?
Can dental face shields be reused between patients?
Yes — full-face polycarbonate shields are designed for multi-patient reuse within a single clinical session when properly disinfected between patients. Clean the shield interior and exterior with a QAC surface spray and wipe between patients; do not autoclave polycarbonate shields as the heat damages the optical clarity and structural integrity. Discard after a full clinical day (8+ hours of continuous use) or when visible surface scratching or hazing reduces optical clarity. Single-use disposable visor shields are available for patients with specific infection risk designations.
Does MedSTA supply dental face safety equipment across Egypt?
Does MedSTA supply dental face safety equipment across Egypt?
Yes — MedSTA supplies Type IIR dental face masks, polycarbonate face shields, and EN 166-certified dental safety glasses in EGP with same-day dispatch from Cairo. Cairo and Giza delivery within 1–3 business days; all other Egyptian governorates within 3–5 business days. Bulk pricing available for Egyptian dental hospitals and multi-chair centres.