No products found
How to Choose the Right Titanium Base for Your Restoration
- Engaging vs. Non-Engaging Design — Engaging Ti-bases lock rotationally into the implant connection, resisting rotation and suiting single-unit crowns. Non-engaging Ti-bases rotate freely, allowing angulation correction across multiple abutments in screw-retained bridge cases.
- Cementation Gap Height — A 0.3–0.5mm spacer height between the Ti-base and the CAD/CAM coping provides an adequate resin cement film thickness for reliable bonding without compromising the coping's marginal fit.
- Implant Connection Compatibility — The Ti-base's connection geometry (internal conical hex, external hex, or other proprietary designs) must match the implant platform exactly — there is no universal Ti-base across implant systems.
- Gingival Collar Height — Collar heights typically range from 1–3mm and should be selected to match measured soft tissue depth, preventing the cementation margin from sitting subgingivally where it becomes inaccessible for cleanup.
- Material Certification — Ti-bases are machined from Grade 5 titanium alloy (Ti-6Al-4V) for the connection interface, providing corrosion resistance and fatigue strength under repeated occlusal loading.
- Bonding Protocol — Reliable resin bond strength between the Ti-base and coping requires sandblasting the bonding surface followed by an MDP-containing primer — skipping either step increases the risk of coping debonding under function.
Titanium Base Configurations at a Glance
| Configuration | Rotational Behavior | Best Suited For | Collar Height Range |
|---|---|---|---|
| Engaging Ti-base | Locked, rotation-resistant | Single-unit screw-retained crowns | 1–3mm |
| Non-Engaging Ti-base | Free rotation | Multi-unit screw-retained bridges | 1–3mm |
| Narrow-Platform Ti-base | Engaging or non-engaging | Anterior single-tooth cases | 1–2mm |
| Wide-Platform Ti-base | Engaging or non-engaging | Molar-site restorations | 2–3mm |
Availability & Delivery in Egypt
MedSTA supplies implant titanium bases priced in EGP with delivery to practices and dental laboratories across Cairo, Giza, Alexandria, and all Egyptian governorates. Confirm connection compatibility with the specific implant system in use before ordering, since Ti-bases are not interchangeable across platforms.
Frequently Asked Questions
Engaging vs. non-engaging Ti-base — when to use each?
Engaging vs. non-engaging Ti-base — when to use each?
Engaging Ti-bases lock into the implant's internal connection and resist rotation, making them appropriate for single-unit crowns where rotational stability is required. Non-engaging Ti-bases rotate freely within the connection, which is necessary for multi-unit bridges where each abutment may need slight angulation correction.
What cementation gap height is recommended for Ti-base bonding?
What cementation gap height is recommended for Ti-base bonding?
A gap of approximately 0.3–0.5mm between the Ti-base and the CAD/CAM coping is generally recommended to provide adequate resin cement film thickness for a durable bond without over-thickening the cement layer.
How is a Ti-base bonded to a CAD/CAM zirconia coping?
How is a Ti-base bonded to a CAD/CAM zirconia coping?
The bonding surfaces of both the Ti-base and the zirconia coping are typically sandblasted, then treated with an MDP-containing primer before applying a dual-cure resin cement, which chemically bonds to both titanium and zirconia surfaces.
Can Ti-bases from different systems fit any implant connection?
Can Ti-bases from different systems fit any implant connection?
No. Ti-base connection geometry is manufacturer- and system-specific; a Ti-base must be matched exactly to the implant platform's internal or external connection design to achieve a passive, accurate fit.
Does MedSTA supply implant Ti-bases across Egypt?
Does MedSTA supply implant Ti-bases across Egypt?
Yes. MedSTA delivers implant titanium bases to practices and laboratories across Cairo, Giza, Alexandria, and all Egyptian governorates, priced in EGP with nationwide delivery.