GENERIC
In stock (24 units)Regular price LE 320.00 EGPUnit price /UnavailableGENERIC
In stock (91 units)Regular price LE 90.00 EGPUnit price /Unavailable-
GENERIC
Mixing Tips Crown & Bridge 1:1 Ratio Blue
In stock (43 units)Regular price LE 190.00 EGPUnit price /Unavailable-
7% offWoodpecker
Woodpecker Tips for veneers preparation (G33)
Very low stock (2 units)Sale price LE 700.00 EGP Regular price LE 750.00Unit price /Unavailable
40% offGuard
In stock (46 units)Sale price LE 160.00 EGP Regular price LE 265.00Unit price /Unavailable
46% offGuard
Guard Dent Intra Oral Tips Yellow
In stock (48 units)Sale price LE 89.00 EGP Regular price LE 165.00Unit price /Unavailable
Asnanco
Very low stock (4 units)Regular price LE 990.00 EGPUnit price /Unavailable
KULZER
Kulzer Bite Registration Tip 96 tips
Low stock (10 units)Regular price LE 2,250.00 EGPUnit price /Unavailable
KULZER
Kulzer Mixing Tips Blue 10:1 - 48 pcs
Low stock (20 units)Regular price LE 2,100.00 EGPUnit price /Unavailable
KULZER
Kulzer Dynamix Mixing Tips 50 tips
In stock (549 units)Regular price LE 16,960.00 EGPUnit price /UnavailableKULZER
Kulzer Intra-Oral Tips 96 tips
In stock (40 units)Regular price LE 2,100.00 EGPUnit price /Unavailable-
KULZER
Kulzer Mixing Tips 1:1 - 48 Pieces
Low stock (20 units)Regular price LE 2,100.00 EGPUnit price /Unavailable-
KULZER
Kulzer Mixing Tips 4:1 Yellow 48 Pcs
Low stock (20 units)Regular price LE 2,100.00 EGPUnit price /Unavailable
How to Choose the Right Dispensing Tip for Your Material System
- Mixing Ratio Compatibility (1:1 vs. 4:1) — most crown & bridge and heavy-body impression cartridges use a 4:1 or 10:1 static mixing ratio, while some luting cements and light-body materials use 1:1; a tip rated for the wrong ratio causes incomplete mixing and voids.
- Tip Diameter and Access — narrower intraoral delivery tips reach subgingival margins and posterior sites more easily than standard-bore mixing tips, at the cost of slower flow for higher-viscosity materials.
- Material Compatibility (Cement vs. Composite vs. Impression) — a tip designed for hydrophilic impression material may not seal correctly on a cement cartridge threaded to a different luer-lock standard; confirm cartridge thread compatibility before bulk ordering.
- Color-Coding Conventions — most manufacturers color-code tips by ratio and bore size (e.g. yellow for 4:1, blue for 1:1); maintaining this convention across brands reduces mix-up risk chairside.
- Single-Use vs. Reusable Design — most mixing tips are single-use only because cured material inside the static mixer cannot be fully cleared; some intraoral metal delivery tips are autoclavable and reusable depending on design.
Dispensing Tip Types at a Glance
| Tip Type | Typical Ratio | Best For | Reuse |
|---|---|---|---|
| Crown & bridge mixing tip | 4:1 / 10:1 | Bite registration, temporary crowns | Single-use |
| Standard cement mixing tip | 1:1 | Resin cement, luting | Single-use |
| Intraoral delivery tip | Direct (no mixing) | Subgingival/posterior placement | Single-use (most) |
| Veneer preparation tip | Direct (no mixing) | Chairside veneer bonding/silane application | Single-use |
Availability & Delivery in Egypt
MedSTA stocks dispensing tips compatible with major cartridge and cement systems, priced in EGP, with delivery across Cairo, Giza, and all Egyptian governorates.
Frequently Asked Questions
What are the different types of dental dispensing tips MedSTA carries?
What are the different types of dental dispensing tips MedSTA carries?
MedSTA stocks mixing tips for crown & bridge and impression cartridges, standard cement mixing tips, intraoral delivery tips, and veneer preparation tips, covering the main dispensing needs across restorative and prosthodontic procedures.
Mixing tip vs. intraoral delivery tip — how do these differ in design?
Mixing tip vs. intraoral delivery tip — how do these differ in design?
A mixing tip contains an internal static mixer that blends two-component material as it passes through, while an intraoral delivery tip is a simple narrow-bore nozzle used to direct already-mixed or single-component material precisely into a confined space such as a subgingival margin.
Do all dispensing tips fit any brand of cartridge gun?
Do all dispensing tips fit any brand of cartridge gun?
No. Tips are molded to a specific cartridge neck and mixing ratio, so a tip designed for one manufacturer's 4:1 cartridge will not seal correctly on a different brand's 1:1 or 10:1 cartridge.
How should dispensing tips be stored to prevent premature setting in Egypt's climate?
How should dispensing tips be stored to prevent premature setting in Egypt's climate?
Store unopened tips in their sealed packaging away from direct heat and humidity, since Egypt's summer temperatures can accelerate premature curing of any residual material trapped in an opened tip left unsealed.
Does MedSTA also stock dedicated tips for impression material and veneer cementation?
Does MedSTA also stock dedicated tips for impression material and veneer cementation?
Yes, MedSTA maintains separate collections for impression mixing tips and veneer cementation tips alongside this general dispensing tips range, for procedures needing a more specialized tip design.