• Free shipping over 5000E£

  • Free help & advice

  • Hassle-free returns

  • Open 7 days a week

50% Off shipping fee

receiveup to 50% off shipping costs of orders above 500LE

SHIPPING50

Buy Zirconia Burs in Egypt

(17 products)

Zirconia burs adjust and finish monolithic zirconia and lithium disilicate restorations chairside, using extra-fine diamond grit for occlusal adjustment and dedicated silicone or diamond-impregnated polishers to restore surface gloss without damaging the ceramic. MedSTA supplies zirconia diamond burs and flame or wheel-shaped polishers in EGP with delivery across Egypt for modern prosthodontic practices. Explore our complete Burs and Stones range, or shop all dental supplies available for fast delivery across Egypt from MedSTA.

View as

How to Choose the Right Zirconia Burs for Chairside Adjustment

  • Grit Size — Adjustment of sintered zirconia requires extra-fine diamond grit, typically under 30µm, at low speed with copious water coolant to avoid inducing microcracks that can propagate into fracture over time.
  • Adjustment Speed and Cooling — Zirconia adjustment should be performed at reduced speed with continuous water spray; dry or high-speed grinding generates localized heat that risks microcrack formation in the ceramic.
  • Shape Selection — Flame-shaped burs suit occlusal groove refinement, while torpedo and wheel shapes are better suited to broader contact adjustment and interproximal contouring.
  • Polishing Sequence — A graduated polishing sequence, medium grit silicone polisher followed by fine grit, restores surface smoothness; skipping the medium step often leaves visible scratch patterns under the fine polisher.
  • Polisher Material — Diamond-impregnated silicone polishers are formulated specifically for zirconia and lithium disilicate; standard composite polishers lack sufficient abrasive hardness to properly finish sintered zirconia.
  • Post-Adjustment Glazing — Chairside polishing restores a usable surface finish but does not fully replicate a laboratory glaze; for extensive adjustments, consider returning the restoration to the lab for reglazing where esthetics are critical.

Zirconia Burs and Polishers at a Glance

TypeShapeGrit/MaterialBest Clinical Use
Extra-Fine Diamond BurFlame<30µm diamond gritOcclusal groove and contact adjustment
Extra-Fine Diamond BurTorpedo<30µm diamond gritInterproximal and margin refinement
Silicone Polisher (Medium)Flame/WheelDiamond-impregnated siliconeFirst-stage polish after adjustment
Silicone Polisher (Fine)Flame/WheelDiamond-impregnated siliconeFinal gloss restoration

Availability & Delivery in Egypt

MedSTA prices zirconia burs and polishers in EGP with nationwide delivery across Egypt. Store diamond burs in a dry bur block away from humidity to prevent shank corrosion, and inspect diamond coating wear before each use.

Frequently Asked Questions

Why do zirconia restorations need special burs instead of standard diamond burs?

Standard coarse diamond burs can induce microcracks or subsurface damage in sintered zirconia during high-speed grinding, so extra-fine grit burs used at reduced speed with water coolant are recommended to adjust the restoration safely.

What speed and cooling should be used when adjusting a zirconia crown chairside?

Adjustment should be performed at reduced speed with continuous water coolant rather than dry high-speed grinding, since localized overheating during dry adjustment can trigger microcracking in the ceramic.

Do I need to polish a zirconia crown after chairside occlusal adjustment, or is it fine as adjusted?

Yes, polishing is necessary. An unpolished, ground zirconia surface is rougher than the original glazed surface and can accelerate wear on opposing natural teeth; a graduated silicone polisher sequence restores a smooth finish.

Can the same diamond burs be used for both zirconia and metal-ceramic (PFM) adjustment?

Zirconia-specific extra-fine diamond burs can generally also adjust PFM restorations, but burs designed for cutting metal frameworks are typically too coarse for safe zirconia adjustment and should not be substituted.

Does MedSTA supply matching bur and polisher sets for zirconia adjustment across Egypt?

Yes. MedSTA supplies zirconia diamond burs in flame and torpedo shapes alongside matching medium and fine silicone polishers, priced in EGP with nationwide delivery across Egypt.

Compare /5