GENERIC
Mixing Tips Crown & Bridge 1:1 Ratio Blue
In stock (49 units)Regular price LE 190.00 EGPUnit price /Unavailable-
Guard
In stock (50 units)Regular price LE 275.00 EGPUnit price /Unavailable
KULZER
Kulzer Mixing Tips Blue 10:1 - 48 pcs
Low stock (20 units)Regular price LE 2,100.00 EGPUnit price /Unavailable
KULZER
Kulzer Mixing Tips 4:1 Yellow 48 Pcs
Low stock (20 units)Regular price LE 2,100.00 EGPUnit price /Unavailable
How to Choose Dental Cement Mixing Tips for Your Practice
- Colour Code and Ratio (Blue 1:1, Yellow 4:1, Brown 1:1) — Blue tips (1:1 ratio): for resin cement cartridges where base and catalyst volumes are equal (most dual-cure resin cements, self-adhesive resin cements, temporary crown materials); Yellow tips (4:1 ratio): for cartridges with high base-to-catalyst ratio (some core build-up materials, A-silicon impression adjuncts); Brown tips: for specific resin cement cartridges requiring the brown nozzle thread size. Confirm the tip colour code matches the cartridge manufacturer’s recommendation before bulk purchasing.
- Number of Mixing Elements (12 vs 16 vs 24) — More helical mixing elements produce more homogeneous material by increasing the number of split-and-recombine mixing events through the nozzle. For high-viscosity resin cements (e.g. Panavia V5), 16-element tips are preferred; for low-viscosity self-adhesive cements (e.g. G-CEM, RelyX Unicem), 12 elements produce adequate homogeneity with less injection force required.
- Intraoral vs Bench-Mixing Tips — Standard mixing tips dispense at the nozzle outlet and are used for bench dispensing before loading; intraoral delivery tips have a longer nozzle extension for direct placement into the crown lumen or subgingival margin access for cement delivery. Both types use the same gun and cartridge but the intraoral tip reduces air entrapment by direct dispensing into the restoration rather than bench-loading and transferring.
- Generic vs Brand-Matched Tips — Generic blue 1:1 tips (190 EGP per pack) are compatible with most 1:1 ratio dual-cartridge systems from standard manufacturers. Kulzer-specific mixing tips (2,100 EGP per 48-piece pack) are matched for Kulzer cartridge thread dimensions and provide confirmed material compatibility. For Kulzer Flexitime, VOCO BisCem, or 3M RelyX cartridges, using incompatible generic tips causes thread leakage or tip blow-off during dispensing.
- Tip Removal and Reuse — Leave the used mixing tip on the cartridge after each use as a protective plug preventing air ingress and premature cartridge setting; remove and replace with a fresh tip immediately before the next dispensing session. Discard the first 5–10 mm of material dispensed through the fresh tip to purge any partially set material from the previous tip removal.
Dental Mixing Tips Available in Egypt
| Product | Colour/Ratio | Best For | Price (EGP) |
|---|---|---|---|
| Mixing Tips Crown & Bridge Blue (1:1) | Blue, 1:1 | Most dual-cure resin cements | 190 |
| Mixing Tips Brown (1:1) | Brown, 1:1 | Specific resin cement cartridges | 210 |
| Guard Dent Mixing Tips Yellow | Yellow, 4:1 | Core build-up, heavy materials | 275 |
| Kulzer Mixing Tips Blue (10:1, 48 pcs) | Blue, 10:1 | Kulzer-specific cartridges | 2,100 |
Availability & Delivery in Egypt
MedSTA supplies dental cement mixing tips from Kulzer, Guard Dent, and generic brands in EGP with same-day dispatch from Cairo. Cairo and Giza delivery within 1–3 business days; all other Egyptian governorates within 3–5 business days.
Frequently Asked Questions
How do I select the correct mixing tip colour for my resin cement cartridge?
How do I select the correct mixing tip colour for my resin cement cartridge?
The cartridge manufacturer specifies the required mixing tip colour on the cartridge label or in the product instructions for use. As a general rule: blue tips (1:1 ratio) fit most standard dual-cure resin cement cartridges (RelyX Unicem, G-CEM, Panavia SA); yellow tips (4:1) fit core build-up material cartridges (Rebilda DC, MultiCore) and some 4:1 impression wash cartridges; clear tips are used for some flowable composite and desensitiser cartridges. When in doubt, consult the cement IFU before substituting a generic tip, as an incorrect ratio tip produces under-mixed material that fails to cure properly.
Why must I discard the first portion dispensed through a new mixing tip?
Why must I discard the first portion dispensed through a new mixing tip?
When a new tip is attached to a cartridge that was previously used, the material remaining in the cartridge barrel may have begun to partially cure at the open face. The first 5–10 mm of material dispensed through the new tip purges this potentially compromised material. Additionally, the static mixing elements require a minimum length to achieve full homogeneity — material dispensed before the full mixing zone is traversed may contain unmixed base or catalyst that will not fully polymerise, leaving a weak or uncured luting film at the crown margin.
Can I reuse a mixing tip between multiple crown cementation sessions?
Can I reuse a mixing tip between multiple crown cementation sessions?
No — reusing a mixing tip between patients or clinical sessions is not acceptable. Once material flows through the mixing elements and is not fully dispensed, the helical elements retain residual setting material that polymerises over time, blocking the tip nozzle on next use or contaminating the next patient’s cement with set fragments. Leave the used tip on the cartridge as a seal between sessions; attach a new tip immediately before each new dispensing session and discard the used tip as clinical waste after each cementation procedure.
How does Egyptian summer heat affect resin cement mixing tips and cartridges?
How does Egyptian summer heat affect resin cement mixing tips and cartridges?
Resin cement cartridges stored above 25°C accelerate spontaneous catalyst activation, significantly shortening the working time during dispensing and increasing the risk of tip clogging from premature setting inside the mixing elements. In Egyptian summer (35–45°C ambient), store resin cement cartridges in a refrigerator at 4–8°C and allow to equilibrate to room temperature for 15–30 minutes before use. Cold cartridges increase material viscosity and injection force, but this is preferable to a tip clog mid-cementation. Never microwave cartridges to accelerate warming.
Does MedSTA supply resin cement mixing tips across Egypt?
Does MedSTA supply resin cement mixing tips across Egypt?
Yes — MedSTA supplies blue 1:1 mixing tips (190 EGP/pack), brown 1:1 tips (210 EGP), yellow 4:1 Guard Dent tips (275 EGP), and Kulzer blue 10:1 tips (2,100 EGP/48 pcs) in EGP with same-day dispatch from Cairo. Cairo and Giza delivery within 1–3 business days; all other Egyptian governorates within 3–5 business days.