• Free shipping over 5000E£

  • Free help & advice

  • Hassle-free returns

  • Open 7 days a week

50% Off shipping fee

receiveup to 50% off shipping costs of orders above 500LE

SHIPPING50

High Speed Handpiece

(19 products)

High speed handpieces are air-turbine-driven instruments operating at 300,000–500,000 RPM, used for enamel and dentin preparation, crown and bridge reduction, and caries removal in restorative and prosthodontic dentistry. MedSTA supplies turbine handpieces from Modern, SHM, E-Press, and Vigor in EGP with fast delivery across Egypt. Explore our full Dental Handpieces range, or shop all dental supplies available for fast delivery across Egypt from MedSTA.
View as

How to Choose the Right High Speed Handpiece for Your Practice

  • RPM Range (300,000–500,000 RPM) — Air-turbine handpieces derive cutting speed from compressed air at 2.0–3.0 bar. High-torque models (e.g. SHM High Torque) maintain cutting speed under load during dense enamel crown preparation better than standard torque turbines.
  • Head Size (Standard vs Mini vs Mini-L) — Standard heads (11–13 mm height) provide maximum torque; mini heads (8–10 mm) improve posterior access in deep cavities and molar crown preparations; mini-L elongated heads extend reach to distal surfaces of second molars.
  • Water Spray Pattern (4-spray vs 6-spray) — Six-spray cooling delivers more even temperature control at the bur-tooth interface, reducing pulpal thermal insult during extended crown preparations. Confirm the handpiece spray pattern matches your unit water pressure.
  • Chuck Type (Push-Button vs Friction-Grip) — Push-button chucks allow single-hand bur changes without a chuck key, improving workflow speed; friction-grip chucks provide a marginally more rigid bur connection under extreme lateral load but require a spanner for bur exchange.
  • Bearing Quality (Ceramic vs Steel Ball Bearings) — Ceramic bearings reduce rotational friction and vibration, extending turbine service life to 200,000–300,000 activations versus 80,000–120,000 for steel. Important in Egyptian clinics with high patient volumes and frequent daily use.
  • LED Illumination — Integrated LED eliminates the shadow cast by the head, critical for visualising cavity margins, crown preparation finish lines, and posterior caries extent without repositioning the operating light.

High Speed Handpiece Types at a Glance

FeatureStandard TorqueHigh TorqueElectric High Speed
RPM350,000–400,000400,000–500,000200,000–300,000
Torque (Ncm)1.5–2.02.0–3.54.0–6.0
Speed stability under loadModerateHighVery high (constant-speed)
Price range (EGP)1,100–1,5001,300–2,2005,000–15,000+

Availability & Delivery in Egypt

MedSTA supplies turbine handpieces from Modern, SHM, Alpha Aire (Vector), Vigor, and E-Press, all priced in EGP. Same-day dispatch from Cairo; Cairo and Giza delivery within 1–3 business days and all other Egyptian governorates within 3–5 business days.

Frequently Asked Questions

What is the recommended RPM range for a turbine handpiece during crown preparation?

For full-crown preparation, an air turbine operating at 380,000–450,000 RPM with a mini head (8–10 mm) provides optimal cutting efficiency on enamel and dentin. Maintain air pressure at 2.5–3.0 bar and confirm the 6-spray water coolant is fully operational to prevent pulpal thermal damage. Intermittent cutting strokes of 2–3 seconds with withdrawal reduce heat accumulation at the bur-tooth interface.

Push-button versus friction-grip turbine handpieces — which should I choose?

Push-button chucks allow single-hand bur changes and are preferred in high-volume Egyptian practices where workflow speed matters. Friction-grip chucks provide a marginally more rigid bur connection under extreme lateral load but require a chuck key for bur exchange. For most restorative and prosthodontic work, push-button is the practical choice; friction-grip is reserved for situations where bur stability under heavy load is critical.

How do I maintain a high speed handpiece in Egyptian clinic conditions?

Lubricate the handpiece with manufacturer-approved oil before and after each autoclave cycle using a handpiece maintenance unit. In Egypt’s high-ambient-temperature environment, allow the handpiece to cool to room temperature before autoclaving to prevent bearing distortion. Store in a dry, covered tray when not in use — humidity accelerates corrosion of steel bearings. Replace turbine cartridges at the first sign of vibration, noise, or speed drop during cutting.

What is the torque difference between standard and high-torque turbine handpieces?

Standard air turbines generate approximately 1.5–2.0 Ncm of cutting torque. High-torque models such as the SHM High Torque increase this to 2.0–3.5 Ncm, maintaining cutting speed under load during dense enamel preparation and full-contour zirconia crown adjustment. For routine class I and II cavity preparation, standard torque is sufficient; for crown and bridge work on posterior teeth, high-torque models reduce procedure time and bur wear significantly.

Does MedSTA supply high speed handpieces from Modern, SHM, and E-Press across Egypt?

Yes — MedSTA supplies turbine handpieces from Modern, SHM, E-Press, Vigor, and Alpha Aire (Vector), all priced in EGP. Orders placed before midday dispatch same-day; Cairo and Giza delivery within 1–3 business days and other Egyptian governorates within 3–5 business days. Contact MedSTA for bulk pricing for multi-dentist practices.

Compare /5