MG
MG SLEEVES FOR SCALLER 300 pcs
Very low stock (1 unit)Regular price LE 175.00 EGPUnit price /Unavailable
How to Choose Dental Scaler Sleeves for Your Practice
- Scaler Handpiece Body Diameter (20–35 mm OD) — Ultrasonic scaler handpieces such as EMS, NSK, and Woodpecker have grip diameters of 20–30 mm; piezo handpieces can be wider at 28–35 mm. Confirm sleeve internal diameter accommodates water tube routing without compressing the external tubing and restricting coolant flow to the tip.
- Water Tube Port Integration — Many ultrasonic scaler handpieces have an external water supply tubing entering the grip from the side. Scaler sleeves with a side notch or overlap design accommodate the water tube entry point; sleeves designed only for closed-body instruments will not fit over the water connection without tearing.
- Sleeve Length for Body and Connection Coverage (25–30 cm) — Ultrasonic scaler handpiece bodies are typically 16–20 cm; sleeves must extend 25–30 cm to cover the grip and the water tube connection above the handpiece body. Shorter sleeves leave the cable and water tube connection area unprotected in the highest aerosol generation zone.
- Material Puncture Resistance (30–40 µm LDPE) — Scaler handpieces vibrate at 25,000–36,000 Hz; the vibration transmitted through the handpiece body creates micro-abrasion stress on the sleeve near the tip area. Thicker 30–40 µm LDPE maintains barrier integrity throughout extended periodontal scaling sessions better than thinner 20 µm standard PE used in handpiece sleeves.
- Aerosol Management Context — Ultrasonic scalers generate the highest aerosol and spatter volumes of any dental instrument. Scaler body sleeves reduce the surface contamination load on the handpiece but do not replace HVE evacuation, face shield use, and rubber dam isolation recommended by ADA and ESCMID protocols for aerosol-generating procedures.
Dental Scaler Sleeves Available in Egypt
| Product | Pack Size | Material | Price (EGP) |
|---|---|---|---|
| MG SLEEVES FOR SCALER | 500 pcs | Clear PE | 170 |
Availability & Delivery in Egypt
MedSTA supplies dental scaler sleeves from MG in 500-piece packs in EGP with same-day dispatch from Cairo. Cairo and Giza delivery within 1–3 business days; all other Egyptian governorates within 3–5 business days. Bulk orders for periodontal specialist practices and dental hospital units are available across Egypt.
Frequently Asked Questions
Do scaler sleeves fit both ultrasonic and piezo scaler handpieces?
Do scaler sleeves fit both ultrasonic and piezo scaler handpieces?
Universal stretch-to-fit PE scaler sleeves accommodate most ultrasonic (magnetostrictive and piezoelectric) scaler handpieces from brands including EMS, NSK, Woodpecker, Satelec, and Acteon, as long as the handpiece grip OD falls within the sleeve’s stretch range (typically 20–35 mm). Piezo handpieces with wider grips (>33 mm) may require a sleeve with a larger internal diameter. Always test-fit before committing to a bulk order for your specific scaler model.
Are there specific scaler sleeves for Woodpecker and EMS ultrasonic units available in Egypt?
Are there specific scaler sleeves for Woodpecker and EMS ultrasonic units available in Egypt?
MedSTA supplies universal scaler sleeves (MG brand 500-piece packs) that are compatible with Woodpecker UDS series, EMS Airflow and Piezon units, and similar piezo scaler handpieces used in Egyptian dental clinics. These universal sleeves accommodate the 22–30 mm grip OD common to most Woodpecker and EMS handpiece bodies. For units with external water tube connections, confirm the sleeve design accommodates the side tubing entry before bulk ordering.
How do dental scaler sleeves integrate with water tubing connections on ultrasonic units?
How do dental scaler sleeves integrate with water tubing connections on ultrasonic units?
On ultrasonic scalers with external water supply tubing (most Woodpecker and EMS models), the water tube enters the handpiece grip from a side port. Correct-fit scaler sleeves must accommodate this entry point by either having a pre-cut notch, sufficient elasticity to stretch over the connection, or an overlapping design that wraps around the tube without compressing and restricting coolant flow to the scaling tip. Improper sleeve fit over the water port can reduce coolant flow and increase tip overheating during extended periodontal sessions.
How many scaler sleeves should an Egyptian dental clinic stock per month?
How many scaler sleeves should an Egyptian dental clinic stock per month?
A single-chair Egyptian dental practice performing ultrasonic scaling on 8 patients per day (50% of appointments) will consume approximately 160–170 scaler sleeves per month. A 500-piece MG pack at 170 EGP therefore covers approximately 3 months for such a practice. Periodontal specialist clinics performing scaling on 100% of patients should plan for a full 500-piece pack per 31 working days. Order bi-monthly to maintain adequate buffer stock.
Does MedSTA supply dental scaler sleeves compatible with Woodpecker and EMS units across Egypt?
Does MedSTA supply dental scaler sleeves compatible with Woodpecker and EMS units across Egypt?
Yes — MedSTA supplies MG brand 500-piece dental scaler sleeves compatible with Woodpecker UDS, EMS Piezon, and similar ultrasonic scaler handpieces used in Egyptian dental clinics, all priced in EGP. Same-day dispatch from Cairo; Cairo and Giza delivery within 1–3 business days and all other Egyptian governorates within 3–5 business days.