Asnanco
Silicone suction converter 2pcs
Very low stock (2 units)Regular price LE 99.00 EGPUnit price /Unavailable-
How to Choose the Right Dental Suction Tips for Your Practice
- HVE vs Saliva Ejector (Critical Distinction) — Suction tips in this category are high-volume evacuation (HVE) cannulas designed for aerosol-generating procedures such as air turbine drilling, ultrasonic scaling, and surgical irrigation. HVE provides flow rates exceeding 100 L/min, which is required for effective aerosol capture. Saliva ejectors (low-volume, <200 ml/min) are a separate category and cannot substitute for HVE during aerosol-generating procedures.
- Tip Material (Disposable Plastic vs Autoclavable Silicone/Metal) — Disposable plastic HVE tips (80–85 EGP) eliminate cross-contamination risk and sterilization overhead. Autoclavable silicone tips (Coltene, 125 EGP) withstand 134°C autoclave cycles and are reusable, providing lower long-term per-unit cost for high-volume practices. Metal HVE tips (surgical suction, e.g. Frazier suction) are used in surgical environments where rigid tip control is required. Confirm your suction unit's tubing diameter before ordering: 9.5 mm (standard) or 11 mm (wide-bore).
- Tip Shape (Standard vs Surgical vs Angled) — Standard HVE tips are 9–11 mm diameter, approximately 130 mm long, with a smooth angled end. Surgical suction tips (Frazier, Yankauer) are rigid, shaped, and calibrated for specific anatomical zones. Angled evacuation tips (offset 45°) allow posterior access without the assistant's hand obscuring the operator's field. Confirm the shape appropriate for your primary clinical scenarios.
- Adaptor Compatibility — Suction tips attach via a push-fit or screw-fit adaptor to the HVE tubing on the dental unit. Confirm adaptor diameter matches your unit (9.5 mm is the Egyptian market standard for most dental chairs). Silicone suction converters (Asnanco) allow cross-compatibility between different tubing diameters.
- Aerosol Reduction (Egyptian Context) — Post-COVID infection control guidelines in Egyptian dental practice reinforce the requirement for HVE (not saliva ejector) as the primary evacuation during aerosol-generating procedures. Proper HVE placement within 6 mm of the operative site reduces aerosol output by up to 90% according to ADA guidelines, reducing occupational exposure risk for Egyptian dental staff.
Dental Suction Tip Types at a Glance
| Type | Material | Flow Rate | Primary Use |
|---|---|---|---|
| Standard HVE tip | Disposable plastic / silicone | >100 L/min | Drilling, scaling, aerosol reduction |
| Angled HVE tip | Disposable plastic | >100 L/min | Posterior quadrant access |
| Surgical suction (Frazier) | Metal / autoclavable | Controlled | Surgical site haemostasis and irrigation removal |
Availability & Delivery in Egypt
MedSTA stocks dental suction tips from Coltene, Asnanco, and other trusted brands, priced from 85–125 EGP per unit or pack, delivered to general and surgical practices across Cairo, Giza, Alexandria, and all Egyptian governorates. Adaptor converters for mixed dental unit configurations are available.
Frequently Asked Questions
What is the difference between a dental suction tip and a saliva ejector?
What is the difference between a dental suction tip and a saliva ejector?
Dental suction tips (HVE cannulas) provide high-volume evacuation at >100 L/min, required for aerosol capture during drilling, ultrasonic scaling, and surgical procedures. Saliva ejectors provide low-volume passive suction at approximately 150–200 ml/min for moisture management during non-aerosol procedures. They are not interchangeable — a saliva ejector cannot remove aerosols during air turbine use and does not meet infection control requirements for aerosol-generating procedures.
Can dental suction tips be autoclaved and reused between patients?
Can dental suction tips be autoclaved and reused between patients?
Autoclavable silicone HVE tips (e.g. Coltene ROEKO) withstand 134°C steam sterilization and are reusable. Inspect after each sterilization cycle for deformation or surface cracking. Disposable plastic tips must be discarded after single patient use. For infection control compliance in Egyptian practice, disposable tips are recommended for all non-surgical procedures; autoclavable tips are appropriate when sterilization protocol can be confirmed between patients.
What diameter suction tip fits standard Egyptian dental unit tubing?
What diameter suction tip fits standard Egyptian dental unit tubing?
The Egyptian dental market standard for most dental chair suction tubing is 9.5 mm internal diameter. Some imported European and North American chairs use 11 mm wide-bore tubing. Before ordering, confirm your unit's suction port diameter. Silicone suction adaptors (Asnanco) are available to bridge 9.5–11 mm incompatibilities without replacing the tubing.
How close to the operative site should the HVE tip be placed for effective aerosol reduction?
How close to the operative site should the HVE tip be placed for effective aerosol reduction?
ADA guidelines recommend placing the HVE tip within 6 mm of the operative site to capture up to 90% of aerosol output during air turbine drilling. Position the tip bevel parallel to the tooth surface and maintain consistent placement throughout the procedure. The dental assistant's role in HVE placement is critical — repositioning every 10–15 seconds during quadrant procedures maintains maximum aerosol capture efficiency.
Does MedSTA supply dental suction tips to clinics across Egypt?
Does MedSTA supply dental suction tips to clinics across Egypt?
Yes. MedSTA delivers HVE suction tips from Coltene, Asnanco, and other brands to dental clinics across Cairo, Giza, Alexandria, and all Egyptian governorates, priced in EGP with fast nationwide delivery. Adaptor converters for mixed dental chair configurations are also available.