ZHERMACK ELITE HD PUTTY 500ML

Zhermack Elite HD+ Putty 500ml is a high-viscosity vinyl polysiloxane (VPS/addition silicone) impression material made for the putty-wash double-step and simultaneous impression techniques. Available in Egypt through MedSTA, this putty-consistency material combines high deformation strength with excellent elastic recovery, making it a reliable choice for crown, bridge, and other fixed prosthodontic impressions.

Clinical Uses

• Double-step (putty-wash) impression technique, paired with Elite HD+ Light Body or Super Light Body
• Simultaneous (one-step) impression technique
• Preliminary and working impressions for fixed prosthodontics (crowns, bridges, inlays/onlays)
• Full-arch and quadrant impressions in general restorative dentistry

Key Features

• High deformation strength and excellent elastic recovery
• High dimensional stability
• 3-year shelf life
• Snap-set effect: long working time with a shorter time in the mouth
• Final hardness of 60 Shore A, biocompatible formula
• Yellow colour for clear contrast against light body wash materials
• Compatible with Zeta 7 Solution and Zeta 7 Spray for safe disinfection

Product features

*These times are intended from the start of mixing at 23°C/73°F. Higher temperatures reduce these times, lower temperatures extend them.
** The time in mouth is intended as at 35°C / 95°F

Material Properties

Packaging

Supplied as 2 x 250ml tubs (Base + Catalyst) with 2 measuring spoons, available in Normal Set and Fast Set formulations.

How to Use

1. Dispense equal amounts of base and catalyst paste using the enclosed measuring spoons.
2. Knead both pastes by hand until a uniform colour is achieved with no visible streaks.
3. Load the putty into the impression tray immediately, within the working time listed above.
4. Seat the tray in the patient's mouth and hold it still until the setting time has elapsed.
5. Remove the tray with a single firm, quick pull along the path of insertion.
6. For the double-step technique, relieve or section the set putty and reseat with Elite HD+ Light Body for the wash impression.

Why Buy From MedSTA

• Genuine Zhermack (Dentsply Sirona Group) stock sourced through authorized channels
• Fast delivery across Cairo, Giza, Alexandria, and nationwide across Egypt
• Dental-professional support before and after your purchase
• Browse our full range of addition silicone impression materials and dental impression materials in Egypt
• Pair with dental impression trays for a complete impression setup

FAQ

What is Zhermack Elite HD+ Putty used for?
It is a high-viscosity addition silicone (VPS) impression material used for the putty stage of double-step or simultaneous impressions in crown, bridge, and other fixed prosthodontic procedures.

What are the working and setting times?
For Elite HD+ Putty Soft: Normal Set has a 2:00 working time and 5:30 setting time; Fast Set has a 1:30 working time and 4:00 setting time, measured from the start of mixing at 23°C/73°F.

Can Elite HD+ Putty be used together with Elite HD+ Light Body?
Yes — Putty and Light Body are designed to be used together in the double-step (putty-wash) impression technique.

How should the set impression be disinfected?
Zhermack recommends Zeta 7 Solution or Zeta 7 Spray for safe disinfection of the impression before it leaves the clinic.

What is the shelf life of Elite HD+ Putty?
3 years from the date of manufacture when stored correctly.